Yamaha Sound Edge Owner's Manual download pdf (Page 14)

Sound Edge Setup

When Install Disk 1 is verified, the following screen will appear.

£If you want to quit the installation process, press the <ESC> key.

4. Press any key on your computer keyboard.

The Installer screen is replaced by the Name screen.

Select the drive onto which you want to install the Sound Edge software.

£The default setting installs the software to a C drive.

If you want to use a different drive, type in the name of the different drive. If you intend to use SampleEdit, see page

61, leave the drive name and directory name as their defaults (drive C, \yamaha directory.)

5. Verify the drive name and press the <ENTER> key.

The Installer screen is replaced by the Directory Name screen.

Type the name of the directory into which you want to install the software (or use the

default name).

£The default name is yamaha. You can change the name by typing in a new name. If you intend to use

SampleEdit, leave the drive name as the default.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 86 87

No comments

Yamaha Sound Edge Owner's Manual Page 14