Yamaha Sound Edge Owner's Manual download pdf (Page 37)

Sound Edge Application Software

Surround

With Surround you can apply precise delay effects to the input signal.

Click the [Surround] box and the Surround setup dialog box appears.

1 Input:

Same as Sign/Level/Value in the Input Mixer, above; however, in this case it adjusts the

signal level input to the Surround.

2 IIR Filter:

See

Mic Echo

, above, for information about the IIR Filter.

3 Delay Design Box:

Delay is like a simultaneous echo effect. You can set the time, volume and number of delays.

See

Mic Echo

, above, for information about the Delay Design Box.

•“Reverse” from the Surround box indicates signal sound loop. •

Output which feeds back into input indicates signal sound loop for each setup window.

• Surround 2 in Type2 and Type3 has an input channel exclusive to the signal sound loop as well as other inputs.

• The number of delays in the Delay Design Box may vary depending on the controller.

• Depending on the Memory setup (see page 25), you cannot set up the delay feature (e.g., if you allocate too much

memory to others, such as Mic Echo).

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 86 87

No comments

Yamaha Sound Edge Owner's Manual Page 37