Yamaha Sound Edge Owner's Manual download pdf (Page 27)

Sound Edge Application Software

EffectEdit

Compared to EffectGear and VoiceMorph, EffectEdit gives you more control over the internal DSP, since it can

be used to edit and reconfigure the DSP.

The Sound Edge DSP has four different types of effects programs and provides three different kinds of sound

input—from the AWM wave table and the FM tone generator, from the stereo analog input, and from the mono

input (through a Microphone), and analog stereo output.

EffectEdit lets you fine tune delay time or transpose the pitch of the input sound. You can save your original

effects created with EffectEdit and use them with EffectGear and KPLOAD (DOS).

About DSP Delay, Echo and Surround Effects

Reflection Reflection



DSP

RIGHT

Surround Effect

Delay Effect Delay Effect

LEFT

Original

Sound

Indicates reflection of sounds.

The DSP digital effect processor processes sound signals electronically to change the pitch

or create artificial ambience—or simulated rooms and other sound environments. A high

quality “delay” unit is at the heart of the DSP, which simulates ambience by delaying the

original sound and creating layers of delayed sounds to mix with the original sound.

The karaoke “echo” sound simulates the delay effect caused by the way sound reflects off

walls in a room. You can create a multi-directional “surround” effect by assigning independent

delays to both the left and right signals.

¢Starting EffectEdit will automatically cancel the present effect setup and some noise may occur. Therefore, please turn

down the master volume in the Mixer window of EffectGear before you start EffectEdit.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 86 87

No comments

Yamaha Sound Edge Owner's Manual Page 27