Yamaha Sound Edge Owner's Manual download pdf (Page 36)

Sound Edge Application Software

2 Delay Design Box

Delay is like a simultaneous echo effect. You can set the time, volume, and number of

delays.

On the right side in the Delay Design box you can set the delay by clicking and dragging the

[red point] up and down to determine the time and volume of delay feedback. As you click

and drag the [red point] to the right, the time location (unit = ms [millisecond]) will appear on

the upper right side of the Mic Echo setup box, along with a black point. After clicking and

dragging the [red point] to the right, also click and drag the [black points] to determine the

number of delays and their time and volume settings.

Key Control

Key Control is available in Type0 and Type1. You can use the Key Control filter to modify the

input signal frequency characteristics, or transpose the input signal, as well as apply delay or

adjust the delayed sound and transposed sound with Type1.

Click on the [Key Control] box and the Key Control setup dialog box appears. (The L/R channel

setups will be displayed on the same dialog box.)

1 IIR Filter (Type0):

See

Mic Echo

, above, for information about the IIR filter.

2 Key Shift (Type0):

To transpose the input signal within ± two octaves. Units are cents. Click [a]/[z] repeatedly

to adjust the key up or down 100 cents (a semitone) at a time, or highlight the [pitch] value

box and type in the desired value.

3 Delay Design Box (Type1):

To set the time, volume, and number of delays.

4 Delay (Type 1)

To adjust the output level of the delayed sound.

5 Key Shift (Type1):

To adjust the output level of the transposed sound.

Type1

Type0

245

Sign ＋

Sign−

Time

Volume

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 86 87

No comments

Yamaha Sound Edge Owner's Manual Page 36