Yamaha Sound Edge Owner's Manual download pdf (Page 13)

Sound Edge Setup

3. SOFTWARE INSTALLATION

Installing the Software

The four floppy disks included in the Sound Edge package—Install Disk 1, 2, 3, 4—contain

both Yamaha and Voyetra application software programs.

¢To ensure proper installation, before installing the software, be sure to exit all applications which may be

active (including Windows) and reboot the MS-DOS.

¢If you removed a previous sound card before installing the Sound Edge, be sure to delete its accompanying

driver programs.

¢When you install the Yamaha Sound Edge application software, the MIDI Mapper will be overwritten.

The installation program also overwrites the AUTOEXEC.BAT, SYSTEM.INI, CONTROL.INI and CONFIG.SYS files. If

you don’t want to lose any existing data, please save them before you install the Sound Edge application software.

Installation Procedure

■ Installing for DOS

1. Insert Install Disk 1 into your floppy disk drive.

2. Select the floppy disk drive where the Install Disk 1 is inserted.

£This manual assumes that your floppy disk drive is the A drive. If your drive is different, then choose the

drive specified for your computer.

3. Type A:INSTALL, then press the <ENTER> key.

A:INSTALL + <ENTER>

£You cannot perform installation from the MS-DOS prompt in the Windows Main group, so be sure to shut

down Windows before installing the software.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 86 87

No comments

Yamaha Sound Edge Owner's Manual Page 13