Yamaha MTX3 User Manual download pdf (Page 99)

Example 4) A system using Dante

MTX Setup Manual

 INPUT settings

Make the following input settings.

Port select button

When you click this, the “Input Patch” dialog box will open. This example

makes the following changes to the default settings.

Port/External Device parameter

access button

This lets you make input connector settings

for the MTX and EXi8. When you click the

button, a popup window will appear. Make

the desired settings, and then in the upper

right, click × to close the popup window.

The appropriate gain level will depend on

the devices that are connected, so set the

level appropriately for your devices.

For CH1, make settings for input connector

1 of the EXi8. The gain of the EXi8 is set to

-6 dB by default.

Because condenser microphone is connected to CH1, leave the gain at 30 dB and

turn phantom power on.

[ON] button

This turns the channel on/off. You should turn off unused channels.

Fader

This adjusts the input level. Leave the fader at -∞ until the system goes online.

Channel name

You can double-click this to edit the name.

In this example, names have been assigned as follows.

CH1 Signal from the main mic of System A, connected to the EXi8

CH9

Signal from the main mic of System B

CH10

System B signal other than the main mic

STIN1 L/R Signal from the CD player connected to ST IN1

STIN2 L/R

Signal from the background music player connected to ST IN2

STIN3 L/R

SD player built into the MTX5-D

CH1 YDIF [1] (System A main mic connected to the EXi8)

CH9

DANTE [9] (Signal from the system B main mic)

CH10

DANTE [10] (System B signal other than the main mic)

CH1 Main Mic

CH9

Sys B9

CH10

Sys B10

STIN1 CD Player

STIN2 BGM

STIN3 SD Player

Port select button

Port/External Device

parameter access

button

[ON] button

Fader

Channel name

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 128 129

Comments to this Manuals

No comments

Yamaha MTX3 User Manual Page 99

Comments to this Manuals

Related products and manuals for Processors Yamaha MTX3