Yamaha MTX3 User Manual download pdf (Page 103)

Example 4) A system using Dante

MTX Setup Manual

103

 Settings in the “ZONE” screen

In the “ZONE” screen you can make Priority DUCKER settings. The Priority Ducker function temporarily attenuates

the inputs from other channels when audio is input from a specified input channel, ensuring that the audio from the

specified input channel will be broadcast clearly. Priority is given in the order of “1

PRIORITY > 2

PRIORITY >

Matrix Out signals.”

In this example, we are assuming that the main A mic (CH1) and the other MTX system’s mic (CH9) will be used for

broadcast to the entire building. Thus, for 1

PRIORITY, we set the PRIORITY SOURCE to CH1; as the 2

PRIOR-

ITY SOURCE we select CH9 in ZONE1, and click the [ON] button located at the right to make it light. Because there’s

no need to make settings for zones 2 through 8, make sure that the [ON] button at the right of 1

PRIORITY and 2

PRIORITY are unlit (turned off).

Use the ZONE select buttons to switch the zone.

For details on each parameter, refer to “MTX Editor User’s Manual.”

ZONE select

button

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 128 129

No comments

Yamaha MTX3 User Manual Page 103