Yamaha MTX3 User Manual download pdf (Page 26)

Example 1) Basic MTX3 system example (analog connections)

MTX Setup Manual

Specifying the computer’s TCP/IP address

To allow the MTX and the computer to communicate, specify the computer’s TCP/IP as follows.

On the [System] menu, click [Network Setup].

The “Network Setup” dialog box will appear.

Click [Open Network Connection].

“Network Connections” will appear.

Right-click the adapter to which the MTX is connected, and choose [Properties].

The “Local Area Connection Properties” dialog box will appear.

Choose [Internet Protocol Version 4 (TCP/IPv4)], and then click [Properties].

The “Internet Protocol Version 4 (TCP/IPv4) Properties” dialog box will appear.

Click [Use the following IP address (S)].

In the [IP address] box, enter “192.168.0.253”; in the [Subnet mask] box, enter

“255.255.255.0.”

Click [OK].

NOTE

The IP address of the MTX3 is set to “192.168.0.1”.

NOTE

In some cases, Windows firewall may block MTX Editor when you make this setting. Select the [Private Network] check box, and

click [Allow Access].

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 128 129

No comments

Yamaha MTX3 User Manual Page 26