Yamaha MTX3 User Manual download pdf (Page 16)

Example 1) Basic MTX3 system example (analog connections)

MTX Setup Manual

 OUTPUT settings

Port select button

Click this to open the “Output Patch” dialog box. In this example we will use the

default settings, but if you want to use a different output port of the MTX, click

this button, choose the desired output port, and then click the [Close] button.

Port/External Device parameter access button

When you click this button, the MTX output connector parameter

edit screen will appear as a popup. Verify that GAIN is set to 0.0 dB.

DELAY/Room EQ

Click this to move to a screen where you can set delay and room EQ.

Speaker processor

Click this to move to the “CHANNEL EDIT” screen. Make the appropriate set-

tings for the speakers that will be connected.

[ON] button

This button turns the channel on/off. Turn off unused channels.

Fader

This adjusts the output level.

Channel name

You can double-click this to edit the name.

In this example, names have been assigned as follows.

NOTE

The pre-installed library contains speaker processor files that are appropriate

for the response of various speakers. By using these files you can make

speaker processor settings easily.

OUT1 Hall A

OUT2 Hall B

OUT3 Entrance

OUT4 Kitchen

Port select button

Port/External Device

parameter access

button

DELAY/Room EQ

Speaker processor

[ON] button

Fader

Channel name

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 128 129

No comments

Yamaha MTX3 User Manual Page 16