Yamaha MTX3 User Manual download pdf (Page 25)

Example 1) Basic MTX3 system example (analog connections)

MTX Setup Manual

Connecting the equipment

After you’ve rack-mounted the MTX and your other equipment, connect the MTX and the other equipment as shown

below. If you’ve copied audio sources to an SD memory card, insert the card into the MTX now.

To connect the MTX to your computer, use a CAT5e or higher cable with all eight pins connected.

Powering-on the MTX

Turn on the power of the MTX.

Turn off the amplifier before you power-off the MTX.

Powering-on the amp

Turn on the power of the amplifier.

To prevent unwanted sound from being output, we recommend that you turn down the attenuator settings of all channels on

the amp itself before you turn it on.

Power Amp 1

Power Amp 2

Wireless Microphone

Reciever

BGM Player

CD Player

DCP

ID=3

DCP

ID=2

DCP

ID=1

DCP

ID=0

Computer

Entrance

Microphone

Kitchen

Microphone

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 128 129

No comments

Yamaha MTX3 User Manual Page 25