Yamaha MTX3 User Manual download pdf (Page 78)

Example 3) Using cascade mode to add MTX input channels (analog connection)

MTX Setup Manual

In the [IP address] box, enter “192.168.0.253”; in the [Subnet mask] box, enter

“255.255.255.0.”

Click [OK].

Taking MTX Editor online

In the upper right of MTX Editor, click the [Online] button. When the unit has successfully come online, the indicator 1 at

the left will light blue.

When the “Synchronization” dialog box appears, select “To Device,” and click the [OK] button. When the indication in the

dialog box has switched, select the system that you want to place online, and click the [Online] button.

The project created in MTX Editor will be sent to the MTX.

NOTE

The MTX3’s IP address is set to “192.168.0.1” and “192.168.0.2,” and the XMV’s IP address is set to “192.168.0.26.”

NOTE

In some cases, Windows firewall may block MTX Editor when you make this setting. Select the [Private Network] check box, and

click [Allow Access].

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 128 129

No comments

Yamaha MTX3 User Manual Page 78