Example 4) A system using Dante
MTX Setup Manual
95
6.
Verify that for the MTX5-D with UNIT ID = 01, the buttons located below YDIF 5 through
YDIF 8 are set to OUT5 (OUTPUT 5) through OUT 8 (OUTPUT 8) respectively.
If the settings are different, click the button and change the setting.
7.
In the lower left, click the [EDIT] button.
Now you can specify the outputs from the MTX to YDIF 1–8.
[EDIT] button Output routing select buttons
Comments to this Manuals