Yamaha MTX3 User Manual download pdf (Page 43)

Example 2) High audio quality system with XMV and YDIF connections (digital connections)

MTX Setup Manual

 Settings in the “ZONE” screen

In the “ZONE” screen you can make Priority DUCKER settings. The Priority Ducker function temporarily attenuates

the inputs from other channels when audio is input from a specified input channel, ensuring that the audio from the

specified input channel will be broadcast clearly. Priority is given in the order of “1

PRIORITY > 2

PRIORITY

>Matrix Out signals.”

In this example, we assume that the microphone in the entrance (CH1) is used for broadcasting to the entire building.

Therefore, we select CH1 as the 1

PRIORITY SOURCE for zone 1 through zone 4, and click the [ON] button located

at the right of 1

PRIORITY to make it light. We select the kitchen microphone (CH2) as the 2

PRIORITY

SOURCE only for zone 4 (Kitchen), and click the [ON] button located at the right of 2

PRIORITY to make it light.

Because there’s no need to make settings for zones 5 through 8, make sure that the [ON] button at the right of 1

PRI-

ORITY and 2

PRIORITY are unlit (turned off).

Use the ZONE select buttons to switch the zone.

For details on each parameter, refer to “MTX Editor User’s Manual.”

ZONE select

button

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 128 129

No comments

Yamaha MTX3 User Manual Page 43