Yamaha MTX3 User Manual download pdf (Page 40)

Example 2) High audio quality system with XMV and YDIF connections (digital connections)

MTX Setup Manual

 INPUT settings

Port select button

When you click this, the “Input Patch” dialog box will open. In this example we

are using the default settings, but if you want to switch to a different input port of

the MTX, click this button, choose the desired input port, and then click the

[Close] button.

Port/External Device parameter

access button

This button lets you adjust the gain and turn

phantom power on/off. When you click the

button, a popup window will appear, allow-

ing you to adjust the gain and turn phantom

power on/off. Make the desired settings,

and then in the upper right, click × to close

the popup window. The appropriate gain level will depend on the devices that are

connected, so set the level appropriately for your devices.

For channels 1 through 8, the gain is set to 30 dB by default. Because condenser

microphones are connected to CH1 and 2, leave the gain at 30 dB and turn phan-

tom power on. Because wireless microphones are connected to CH3 and 4, lower

the gain to 0 dB.

EQ/HPF (High Pass Filter)

Click this to switch to the “CHANNEL EDIT” screen. Adjust the EQ and HPF

appropriately for the microphone you’re using. For ST IN, only EQ is available.

When you want to return to the “MAIN” screen, click the [MAIN] button.

FBS (Feedback suppressor)

FBS is provided on input channels 1 through 4. We recommend that microphone

inputs, and particularly movable microphones such as wireless microphones, be

connected to channels 1 through 4. When you click here, you will switch to the

FBS setting screen.

When you want to return to the “MAIN” screen, click the [MAIN] button.

For details on FBS settings, refer to “MTX Editor User’s Manual.”

[ON] button

This turns the channel on/off. You should turn off unused channels.

Fader

This adjusts the input level. Leave the fader at -∞ until the system goes online.

Channel name

You can double-click this to edit the name.

In this example, names have been assigned as follows.

CH1 Entrance

CH2 Kitchen

CH3 W.Mic1

CH4 W.Mic2

STIN1 CD Player

STIN2 BGM

SDIN SD Player

Port select button

Port/External Device

parameter access

button

EQ/HPF

FBS (Feedback sup-

pressor)

[ON] button

Fader

Channel name

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 128 129

Comments to this Manuals

No comments

Yamaha MTX3 User Manual Page 40

Comments to this Manuals

Related products and manuals for Processors Yamaha MTX3