Yamaha MTX3 User Manual download pdf (Page 66)

Example 3) Using cascade mode to add MTX input channels (analog connection)

MTX Setup Manual

 OUTPUT settings

Port select button

Click this to open the “Output Patch” dialog box. In this example we will use the

default settings, but if you want to use a different output port of the MTX, click

this button, choose the desired output port, and then click the [Close] button.

Port / External Device parameter access button

When you click this button, a popup window will appear, allowing

you to set the MTX’s output connector parameters and the parameters

of the external device(XMV) associated with the channel. Verify that

GAIN is set to 0.0 dB.

DELAY/Room EQ

Click this to move to a screen where you can set delay and room EQ.

Speaker processor

Click this to move to the “CHANNEL EDIT” screen. Make the appro-

priate settings for the speakers that will be connected.

[ON] button

This button turns the channel on/off. Turn off unused channels.

Fader

This adjusts the output level.

Channel name

You can double-click this to edit the name.

In this example, names have been assigned as follows.

NOTE

The pre-installed library contains speaker processor files that are appropri-

ate for the response of various speakers. By using these files you can

make speaker processor settings easily.

UNIT ID = 01 OUT1 Room

Port select button

Port / External Device

parameter access

button

DELAY/Room EQ

Speaker processor

[ON] button

Fader

Channel name

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 128 129

No comments

Yamaha MTX3 User Manual Page 66