Yamaha S90 Manual download pdf (Page 92)

Basics Section Quick Guide Reference Appendix

Parameter Table

This convenient table lets you quickly and easily ﬁnd

any desired parameter — spotting its location in the

various Edit modes of the S90 and conﬁrming how to

call it up.

The setting displays for parameters are selected with

the Function buttons ([F1] - [F6]) and the Sub

Function buttons ([SF1] - [SF5]). The table below

makes it exceptionally easy to call up the desired

parameter in the intended mode. You can also easily

see in which modes similar or related parameters are

distributed.

The table may come in handy when you want to

duplicate settings for one parameter in the Voice mode,

for example, to the same parameter in the Performance

mode, or when you want to make more detailed and

complex settings in the Performance mode while

maintaining the Voice mode settings.

Page references and parameter reference numbers are

given for each parameter as well, making it easy to ﬁnd

the corresponding explanation in the Owner’s Manual.

While using the S90, simply note the currently selected

mode, the edit status (Common, Part, etc.), and the

Function number — then refer to this table.

■ Using the table

• The parameters are organized in the display according to the

corresponding Function buttons ([F1] - [F6]) — each of

which is represented by the dark rows in the table. For

example, you can see that the Mono/Poly parameter (third

parameter in the F1 section) belongs to the [F1] button.

Likewise, Pan (second parameter in the F2 section) is called

up by ﬁrst pressing [F2].

• The dark row of each function button shows the name of

that button’s tab for the corresponding mode (indicated by

the column title). For example, Mono/Poly is in the

GENERAL tab (for Voice Edit - Common), and in the

VOICE tab (for Performance Edit and Seq. Play Mixing

Edit).

• Taking a look at the Mono/Poly row, there are four

corresponding [SF2] entries. This means that Mono/Poly

can be called up by pressing [SF2] after pressing [F1] in the

corresponding Edit mode.

• In general, most of the table entries are in bold letters,

indicating that the parameter can be found at the speciﬁed

location (button press). Normal type for an entry indicates

that the parameter is not available in for the corresponding

Function button, but can be found at another Function

button. For example, the ArpSwitch parameter entry near

the bottom of the F1 section reads “F3→SF1,” indicating

that (for the Voice Edit - Common mode) it can be called up

by pressing [F3] followed by [SF1].

• When a similar effect can be gained or different parameters

share a common aspect, an entry is put in parentheses. The

page references and parameter reference numbers are for

standard (bold) parameters; when you ﬁnd an entry in

parentheses, check the corresponding Function button’s

section in the table as well.

• Entries labeled “Direct” indicate that there are no Sub

Function tabs on the corresponding display and the

parameter can be set directly from the Function display.

■ Example Uses

• When you want to check which parameters are

available in a certain mode:

Look down the column of Voice Edit - Element - Normal to

see which parameters have entries. If there is an entry, the

parameter exists in the corresponding mode.

• When you want to ﬁnd a certain parameter in

the table:

Refer to the Parameter/Function List on page 98. This lists

all parameters in alphabetical order, and shows which

Function key each is assigned to. Once you know the

Function key, go to the section of the table corresponding to

that key.

• When you want to check which Edit modes

contain a certain parameter:

Find the desired parameter and look across to see which

columns have entries. For example, LFO Speed (second

parameter in the F5 section) can be found in both Voice Edit

- Common (Normal) and Voice Edit - Element. You can also

easily see that the parameter isn’t available for Drum Voices.

• When you want to check or edit a certain

parameter’s settings in a speciﬁc mode:

Let’s say you want to edit the Pan setting in a Performance,

but you only want to change one particular sound (Element)

and not the entire Performance. First, make sure you’re at

“home base” in one of the Play modes. (If you’ve called up

the Performance Common display where Pan is set for the

entire performance, make sure to exit from that display.)

Then, check the row of entries for Pan in the table (in the F2

section) and look in the Voice Edit - Element - Normal

columns. You’ll see that the Pan entry there shows “[F4]→

[SF1].” This indicates that to edit Pan for an Element, you

call up the Voice Edit Element mode, then press [F4]

followed by [SF1].

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 138 139

Comments to this Manuals

No comments

Yamaha S90 Manual Page 92

Comments to this Manuals