Yamaha S90 Manual download pdf (Page 77)

Basics SectionQuick GuideReferenceAppendix

Playing the Songs

Song editing in the Sequence

Play mode

● [F2] Sequence Play Output Channel

From this display you can conﬁrm the MIDI channel,

and determine which MIDI port the channel data is

sent to.

OUT CH (Output Channel)

Indicates channel transmission to the MIDI OUT

terminal (Display only).

n In the Sequence play mode, the MIDI data created by

playing the keyboard/wheels is sent to the tone generator

block or the external MIDI devices via the MIDI output

channel of the currently selected track.

Port

Determines the MIDI transmission port for the

corresponding channel. This is useful for sending data

to external tone generators over multiple MIDI ports in

an extended MIDI setup. Keep in mind that this

parameter is available for channels having assignments

to Plug-in parts 1 - 3 (for installed single-part boards)

or Plug-in parts 17 -32 (for installed multi-part boards).

The internal tone generator parts of the S90 are

automatically ﬁxed at port 1.

❏ Settings off, 1 ~ 3

n Port data can be output only through the USB terminal.

Mixing mode

In this mode, you can set up mixing data, and set

various parameters for the tone generator parts —

including the desired voice, as well as its level, pan, EQ,

effect and other settings.

How the Mixing mode affects the tone generator parts,

and how it is affected by other elements is made clear

by the following diagram.

Mixing parameters are not actually part of the song

data, but rather are settings for the tone generator, as it

is played back by the song data. As such, the Mixing

parameter settings are not recorded to the song tracks.

n Even if the selected song has no sequence data, this

Mixing data can be stored (put) to Mix template as

system data (page 79). Playing back such song data

transmits the mixing setup to the external MIDI

instrument.

Mixing mode (Simple Mixer

functions)

n The parameters that have the same name in the Mixing

mode and in the Mixing Edit mode have the same

functions and settings.

Basic Procedure

1 In the CHAIN display, press the [F6] (MIX) button

to enter the Mixing mode.

2 Select the desired Mix Template for editing (page

79), then exit from the TEMPLATE display.

Sequencer block

Song Data

Mixing

Playback of song data affects

the Mixing settings.

Tone Generator

block

MIDI data from external

devices affects the Mixing

settings.

Editing in the Mixing mode

determines the Mixing

settings.

Tone

Generator

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 138 139

Comments to this Manuals

No comments

Yamaha S90 Manual Page 77

Comments to this Manuals