Yamaha S90 Manual Page 102

  • Download
  • Add to my manuals
  • Print
  • Page
    / 139
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 101
102
Basics Section Quick Guide Reference Appendix
91
Gain
Filter Gain
Determines the Gain (the amount of boost applied to the signal sent to the Filter).
92
Cutoff
Filter Cutoff Frequency
Determines the cutoff frequency for the Filter, or the central frequency around which the Filter is applied.
63 *42
93
Resonance
Filter Resonance
Determines the amount of Resonance (harmonic emphasis) applied to the signal at the cutoff frequency.
63
*41
94
Width
Filter Width
With the BPFw, this parameter is used to adjust the width of the band of signal frequencies passed by the filter.
64
95
Distance
Distance
Determines the distance between the Cutoff frequencies, for the Dual Filter types. (The two filters in combination are connected in
parallel fashion.)
63
96
HPFCutoff
HPF Cutoff Frequency
Determines the central frequency for the Key Follow parameter (below) of the HPF. This parameter is available only when a filter type
“LPF12” or “LPF6” is selected (Normal Voice).
64
97
HPFKeyFlw
HPF Cutoff Frequency Key
Follow
Determines the Key Follow setting for the HPF Cutoff frequency (Type=LPF12/LPF6 only). This parameter varies the center frequency
according to the position of the notes played on the keyboard. Positive settings raise the center frequency for higher notes and lower
it for lower notes. Negative settings have the opposite effect.
98
EGTime
FEG Time Velocity
Sensitivity
Determines the degree to which velocity affects the pitch change of the Filter EG. Positive settings cause the pitch change to
become faster when you play the keyboard harder (for a large Velocity value). Negative values have the opposite effect. This
affects only the specified Segments.
*27
99
Segment
FEG Time Segment
*26
100
EGLevel
FEG Level Velocity
Sensitivity
Determines the sensitivity of the PEG Level (the width of the FEG change) to velocity. The Curve parameter lets you select from five
different preset velocity curves (graphically indicated in the display), each determining how velocity affects the Filter EG.
*27
101
Cutoff (VEL SENS)
Filter Cutoff Velocity
Sensitivity
Determines the sensitivity of the Cutoff frequency to velocity.
102
Resonance
(VEL SENS)
Filter Resonance Velocity
Sensitivity
Determines the sensitivity of the Resonance to velocity.
103
(FEG) TIME
FEG Time
Determines the transition in tone (cutoff frequency) from the moment a note is pressed on the keyboard to the point at which the
sound stops.
65
104
(FEG) LEVEL
FEG Level
65
105
(FEG) Depth
FEG Depth
65
106
CutoffSens
Filter Cutoff Key Follow
Sensitivity
Determines the Filter Key Follow (Filter Scaling) Sensitivity , or how much the level of the cutoff frequency changes in response to the
note positions on the keyboard (scale).
107
CenterKey
Filter Cutoff Key Follow
Center Key
Indicates that the central note for Cutoff Sensitivity above is C3. At C3, the cutoff frequency behaves according to its actual settings.
For other notes, the level varies in proportion to the key played and its interval away from the center key. (Display only; cannot be
changed here.)
108
EGTimeSens
FEG Time Key Follow
Sensitivity
Determines the sensitivity of the FEG Rate settings (the speed of the FEG change) to note position.
*28
109
CenterKey
FEG Time Key Follow
Center Key
Determines the basic pitch (note number) used by the EGTimeSens parameter (above). When the center note is played, the FEG
time behaves according to its actual settings. For other notes, the speed varies in proportion to the key played and its interval away
from the center key.
*12
*28
110
(Scaling)
BREAKPOINT
Filter Cutoff Scaling Break
Point
Determines the Break Points for Filter Scaling (how the filter cutoff frequency responds to note position) and Offset Levels.
*12
*43
*45
111
(Scaling) OFFSET
Filter Cutoff Scaling Offset
*43
*45
112
LPFCutoff
Low Pass Filter Cutoff
Determines the cutoff frequency for the low pass filter.
63
*17
113
LPFReso
Low Pass Filter Resonance
Determines the amount of filter resonance or emphasis of the Cutoff Frequency.
63
114
LPFCutoff
(VEL SENS)
Low Pass Filter Cutoff
Velocity Sensitivity
Determines the sensitivity of the low pass filter cutoff frequency to velocity.
Ref.
#
Display
Parameter Name
Explanation
Related
Page
Page view 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 138 139

Comments to this Manuals

No comments