Yamaha S90 Manual download pdf (Page 81)

Basics SectionQuick GuideReferenceAppendix

Playing the Songs

1 After pressing the [SEQ PLAY] button, press [F6]

(MIX) to enter the Mixing mode, then enter the edit

mode (page 29).

n Before entering the Mixing Edit mode, you need to

select a Mixing Template for editing (page 79).

n You can initialize the Mixing settings, if necessary

(page 70).

2 If the Common Edit display is shown, press the

appropriate NUMBER button [1] - [16] to switch to

the Part Edit display.

Here, we’ll select Part 1 for the piano, Part 2 for bass

and Part 10 for drums. First, let’s select Part 1.

3 Press [F1] → [SF1] to switch to the VOICE screen,

then specify the Voice to be used as the piano Part.

4 Similarly, assign Part 2 to the Bass Voice and Part 10

to the Drum Voice.

5 Press [F2] → [SF1] to switch to the VOLUME

screen, then set the volume for each Part as well as

its Pan position, Chorus and Reverb Send levels, if

necessary. For details, see Ref. #43 - 48.

6 Press [F1] → [SF2] and switch to the MODE screen.

Set the relevant parameters to the appropriate

values: 1, 2, and 10.

7 Use the [▲] and [▼] buttons and switch to the

Mono/Poly setting. Set the parameter to “Poly”

(polyphonic).

n For Parts that have single-note passages only and do

not require polyphony, the Mode parameter can be

set to “mono” (monophonic).

8 Press the [F1] → [SF3] to call up the NoteLimit

(Note Limit) and VelLimit (Velocity Limit) settings,

and check whether or not the Part of each Voice is

set appropriately — in other words, make sure that

the Note or Velocity settings do not prevent the

Voice from being played normally. Except in special

cases, you should generally avoid setting limits on

the note and velocity ranges, in order to ensure that

notes are sounded properly and are not cut off.

n There are many other Part-speciﬁc parameters in the

Mixing Edit mode. For details, see the “Reference”

section.

9 Before exiting the Edit Mode, you need to save the

settings for the Mix Template. For details about

saving Mix Templates, see page 79.

Now, when you select this Mix Template in the

Sequence Play mode, you can play back the song ﬁle on

computer (sequencer), and the piano, bass and drum

Parts will be played back according to each track’s

MIDI channel.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 138 139

Comments to this Manuals

No comments

Yamaha S90 Manual Page 81

Comments to this Manuals