Yamaha S90 Manual Page 125
- Page / 139
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
125
Basics SectionQuick GuideReferenceAppendix
Installing Optional Hardware
5 Insert the Plug-in board into the expansion bay,
slowly pushing it all the way in until it fits in place.
6 Bring the cable end around and connect it to the
board. Make sure to connect the proper cable,
matching the color of the cable to the slot used.
Also, take care not to pull on the cable too forcefully
as you connect it to the board.
7 Carefully put the ribbon cable back into the S90,
making sure that no part of the cable sticks out of
the instrument.
8 Replace the cover with the screw you removed in
step 2 above. Replacing the cover also serves to
securely hold the Plug-in board(s) in place.
9 Check that the installed Plug-in board is functioning
properly. Turn on the power.
•A message appears indicating that the installed Plug-in
Board is being checked. The main display then appears
and the corresponding slot indicator at the right top of the
front panel lights. This indicates that the board has been
successfully installed.
• If an error message appears, the S90 freezes after a while,
indicating that the installation was not successful. If this
happens, turn off the power and carefully go through the
installation procedure again.
Plug-in SLOT
GREEN
YELLOW
ORANGE
3
2
1
Plug-in SLOT
GREEN
YELLOW
ORANGE
3
2
1
Plug-in Connector
Notch
Connector from S90
Plug-in board
Press the connectors together
until the two notches lock into
the sockets.
Plug-in SLOT
GREEN
YELLOW
ORANGE
3
2
1
PROGRAM
SLOT 1 SLOT 2 SLOT 3
ORGAN BASS STRINGS BRASS REED/PIPEGUITAR/
PLUCKED
PRE 3 GM USER PLG 1 PLG 2 PLG 3
CATEGORY
SEARCH
Slot Indicator lamps
In this example, a Plug-in board has been installed to slot 1.
- MUSIC SYNTHESIZER 1
- SPECIAL MESSAGE SECTION 2
- IMPORTANT SAFETY INSTRUCTIONS 3
- PRECAUTIONS 4
- About This Manual 7
- Application Index 8
- Table of Contents 11
- The Controls & Connectors 12
- Rear Panel 13
- Setting Up 14
- Connections 15
- Connecting External MIDI 16
- Equipment 16
- Connecting to a Personal 17
- Computer 17
- Connecting Various 18
- Controllers 18
- Demo Playback 19
- Overview of the S90 20
- Plug-in board line-up 21
- Maximum Polyphony 22
- ● Voice mode 23
- ● Performance mode 23
- Card Drive/Sequencer 24
- Voices & Performance 25
- Voice & Element 26
- Performance 26
- GM Voices 27
- Internal Memory 28
- Memory Card 28
- Basic Operations 29
- Selecting a Mode 30
- Display Indications 30
- Selecting Functions 32
- How to leave the 32
- [ENTER] button 32
- Display-based Controls 33
- Naming (Entering Characters) 34
- Using the Character List 35
- Relative) 35
- Playing Voices 36
- 3 Select a Voice Group 37
- 4 Select a Voice number 37
- 5 Play the keyboard 37
- DEC/NO INC/YES 38
- EXIT ENTER 38
- Voice editing in the 39
- Voice Play mode 39
- (Quick Edit) 39
- Playing Performances 41
- Layering Voices (Parts) 42
- Together (Layer) 42
- Splitting the Keyboard 42
- Editing 44
- Performances in the 44
- Performance Play 44
- Using the Arpeggio function 45
- F2F1 F3 F4 F5 F6 46
- SF1 SF2 SF3 SF4 SF5 46
- INFORMATION 46
- Using as a Master Keyboard 48
- Playing the Master Demo 49
- (Selecting Masters) 49
- Using Zones — 51
- Creating a Layer/ 51
- Split with an external 51
- 7 Store the settings to a 52
- Master (page 73) 52
- 5 Call up the TRANS display 52
- 6 Call up the NOTE display 52
- Using Controllers 53
- Footswitch (assignable) 54
- ON/OFF ON/OFF ON/OFF ON/OFF 55
- MIDI Control 56
- Controller Set 56
- Using the Remote 58
- Control function 58
- Remote Control Assignments 59
- Voice Edit 60
- Performance Edit mode 61
- 4 Set the Element Parameters 62
- About the Filter types 63
- Resonance 64
- 6 Storing Edited Voices 66
- Using Effects 67
- Effect connection 68
- ● In the Performance mode: 69
- Using the Jobs 70
- Edit Recall [F2] 71
- Using the Copy function [F3] 71
- Factory Set (Restore Factory 72
- Defaults) 72
- Saving the Settings (Store) 73
- Playing the Songs 75
- Moving the Song position/ 76
- Changing the Tempo 76
- Mixing mode 77
- Mixing Edit mode (Detailed 79
- Mixer functions) 79
- Piano Voice 80
- (sequencer software) 80
- Bass Voice 80
- Drum Voice 80
- Using Memory Cards 82
- File/Folder selection 83
- New Folder Creation 83
- File types that can be 83
- [F1] Formatting Memory 84
- Cards (FORMAT) 84
- [F2] Saving the S90 data to 85
- Memory Card (SAVE) 85
- [F3] Loading the S90 Data 85
- [F4] Renaming the Files 86
- (RENAME) 86
- [F5] Deleting the Files 86
- (DELETE) 86
- Touch Sensitivity 87
- Function Tree 88
- Parameter Table 92
- SF5 SF5 40 99 93
- (F3→Selected 96
- Parameter/Function List 97
- Reference (Function List) 98
- (VelSensOfs) 99
- Related 100
- Utility ([F3]→ [SF1]) 108
- Freq (Frequency) 109
- Q (Frequency Characteristic) 109
- Speed = fast 112
- Speed = slow 112
- Keyboard 113
- Generator 113
- External MIDI Device 113
- Information Displays 114
- Utility mode 115
- Card mode 115
- Master mode 115
- Display Messages 116
- Messages Information 117
- About MIDI 118
- MIDI Messages Transmitted/ 119
- Received by the S90 119
- CHANNEL MESSAGES 119
- Channel Mode Messages 121
- SYSTEM MESSAGES 122
- Installing Optional Hardware 123
- Optional Plug-in 124
- Board Installation 124
- CATEGORY 125
- Optional mLAN8E 126
- Installation 126
- 4). If 127
- Troubleshooting 128
- Plug-in board does not work 130
- Specifications 131
- FCC INFORMATION (U.S.A.) 138
- OWNER’S MANUAL 139
© 2020, manymanuals.com. All rights reserved. | 1.256 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals