Yamaha PM1D Owner's Manual Page 84

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 83
PM1D System Software V1.5 Supplementary Manual
84
If the selected MATRIX channel is paired, this shortcut
will operate differently depending on whether you press
and hold the [SEL] switch of the odd-numbered (left)
channel or of the even-numbered (right) channel.
If you press and hold the odd-numbered (left)
[SEL] switch, you can use the MIX OUTPUT block
MIX [LEVEL/BAL] encoder to adjust the pan of the
signal that is sent from that channel to the selected
pair of MIX buses.
During this time, the MIX [NAME] indicator of the
MIX OUTPUT block will alternately display “PAN”
and the short name of the MIX channel, and the
LEDs surrounding the MIX [LEVEL/BAL] encoder
will indicate the pan value.
If you press and hold the even-numbered (right)
[SEL] switch, you can use the MIX OUTPUT block
MIX [LEVEL/BAL] encoder to adjust the send level
of the signal that is sent from that channel to the
selected pair of MIX buses.
Hint
For either shortcut, it will take a certain amount of
time from when you first press the [SEL] switch until
the [NAME] indicator starts blinking. If you do not
want to wait this long, you can hold down the [SEL]
switch and immediately operate the [LEVEL/BAL]
encoder of the send destination (or send source), and
the shortcut will be enabled from that instant.
If ROUTING is turned on in the AUTO DISPLAY
ON/OFF area of the UTILITY function PREFER-
ENCE screen, using this shortcut operation will
immediately cause the display to shift to the
MATRIX/ST ROUTING screen, and the cursor will
move to the corresponding knob.
PAIR
ON ON
PAN
PAIR
ON
O
MATRIX OUTPUT block
MIX OUTPUT block
Alternately displays
“PAN” and the short
name of MIX channel 1.
Use this knob to
adjust the pan of the
signal that is sent
from MIX channel 1 to
MATRIX buses 1/2.
Indicates the pan of
the signal that is
sent from MIX chan-
nel 1 to MATRIX
buses 1/2.
PAIR
ON ON
SEND
PAIR
ON
O
MATRIX OUTPUT block
MIX OUTPUT block
Alternately displays
“SEND” and the short
name of MIX channel 1.
Use this knob to
adjust the level of the
signal that is sent from
MIX channel 1 to
MATRIX channels 1/2.
Indicates the send
level of the signal that
is sent from MIX
channel 1 to MATRIX
channels 1/2.
Page view 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 103 104

Comments to this Manuals

No comments