Yamaha PM1D Owner's Manual download pdf (Page 25)

DUAL CONSOLE mode added

■ GPI screen

The following restrictions apply to GPI IN/GPI OUT

settings.

• GPI IN

On console 1 / PC (PM1D Manager), settings can be

made only for the GPI port of console 1 and the

engine. On console 2, settings can be made only for

the GPI port of console 2.

• GPI OUT

On console 1 / PC, settings can be made only for the

GPI port of console 1 and the engine. On console 2,

settings can be made only for the GPI port of console

2. However, signals can be output from console 2 to

the engine port.

■ USER DEFINE/GPI function

User-deﬁnable switches and functions assigned to GPI

IN can be set and operated independently from console

1 or 2. However for some functions, the following limi-

tations apply.

• INC/DEC RECALL

The preceding or following scene will be recalled rel-

ative to the scene number that was last recalled/

stored on console 1. Be aware of this when using this

function on console 2.

• MONITOR B SELECT

While Dual Console mode is in operation, the

MONITOR B SELECT function assigned to a user-

deﬁnable switch or GPI IN is not valid.

• ENGINE B SELECT (GPI only)

The GPI IN test button assigned to the ENGINE B

SELECT function cannot be operated from console

Hint

The MONITOR A SELECT function can be set and

operated from either console.

■ FADER START screen

The settings of this screen cannot be made from a PC

(PM1D Manager) connected to a system that includes a

console.

■ 2TR IN screen

In Dual Console mode, you can select which 2TR IN (of

console 1 or console 2) will be used for each of the six

2TR IN inputs. This selection can be made only from

console 1.

To switch the console whose 2TR IN jacks are being

used, use the 2TR IN screen INPUT CONSOLE button.

At this time, the Fs ﬁeld will indicate the sampling fre-

quency of the signal that is being input to the selected

console.

On console 2, the INPUT CONSOLE button will be

masked, and cannot be operated. However, you can use

either console to select the input source (2TR IN 1 / 2TR

IN 2 only), switch the SRC (sample rate converter) ON/

THROUGH, adjust the level, and switch the phase.

These operations will be linked between console 1 and 2.

■ ST OUT DIGITAL screen

In Dual Console mode, the same signals will be output

from STEREO OUT A of both consoles and STEREO

OUT B of both consoles. Thus, the settings in the ST

OUT DIGITAL screen will be linked.

■ SYSTEM CONNECTION screen

In general, routing changes in the SYSTEM CONNEC-

TION screen can be performed only from console 1.

However, routings connected to console 2 itself can be

changed only from console 2.

If a routing change is executed from one console, a

warning message will be displayed on the other console.

All other SYSTEM CONNECTION screen settings (per-

mission for PC connection, cascade connection enable/

disable, standard mode / mirror mode selection, etc.)

can be performed only from console 1.

Only this button can be operated

from console 2

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 103 104

Comments to this Manuals

No comments

Yamaha PM1D Owner's Manual Page 25

Comments to this Manuals

Related products and manuals for Audio mixers Yamaha PM1D