Yamaha PM1D Owner's Manual download pdf (Page 56)

PM1D System Software V1.5 Supplementary Manual

Horizontal pair and vertical pair

When input channels are paired, the method of pairing adjacent channels such as 1+2, 3+4... (as in previous

versions of the system) is called “horizontal pair mode.” Version 1.5 now also allows channels to be paired in

combinations such as 1+49, 2+50..., and this is called “vertical pair mode.”

When you switch from horizontal pair mode to vertical

pair mode, new numbers will be assigned to each input

channel as follows:

channel 1 → no change channel 2 → channel 49

channel 3 → channel 2 channel 4 → channel 50

channel 5 → channel 3 channel 6 → channel 51

channel 7 → channel 4 channel 8 → channel 52

However, please note that this simply means that the

input channel previously called “channel 2” has now

been renamed “channel 49” and changed places on the

panel. Elements such as unit assignments, channel

name, and mix parameters do not change. This means

that even if you switch from horizontal pair mode to ver-

tical pair mode, the combinations that can be paired will

not change.

In each screen of the display (except for the PANEL

ASSIGN screen and TRACKING RECALL screen),

switching to vertical pair mode merely changes the dis-

played numbers; the conﬁguration will stay the same as

in horizontal pair mode.

Horizontal pair mode

Vertical pair mode

➪

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 103 104

No comments

Yamaha PM1D Owner's Manual Page 56