Yamaha PM1D Owner's Manual download pdf (Page 7)

Changes to the constantly-displayed screen

5 SCENE MEMORY

Displays the number and title used when most

recently recalling/storing the currently selected scene

memory. Depending on the state of the scene, the

following symbols may be displayed in the margin of

the SCENE MEMORY ﬁeld.

• EDIT

This symbol will be displayed if you edit a parameter

of a scene, patch, unit, or name after recalling/storing

a scene memory. When you recall/store a scene

memory, this symbol will disappear. (However, it

may not disappear if Recall Safe is turned on.)

• TC

This symbol will be displayed if the EVENT

RECALLING button is set to ENABLE in the TC

EVENT screen. You cannot rewrite scene memories

or patch/unit/name libraries while this symbol is dis-

played. This means that you will also be unable to use

functions such as store, undo store, link on/off, title

editing, sort, or load.

• PREVIEW

In PREVIEW mode, this symbol will be displayed.

In PREVIEW mode, the scene number and title will

be displayed in white characters on a red back-

ground.

• READ ONLY

• PROTECT

The READ ONLY symbol will be displayed if the

scene currently selected for store/recall is read-only

(00.0-00.9). The PROTECT symbol will be displayed

if protect is turned on.

6 Other symbols

The following symbols will be displayed at the upper

right of the display according to the state of the con-

sole.

• SOLO/CUE

According to the current solo or cue state, this area

will display the following symbols:

SOLO, EFFECT CUE, SUBIN CUE, INPUT CUE,

DCA CUE, OUTPUT CUE, KEY IN CUE

• TB/OSC (Talkback / Oscillator)

The TB symbol will be displayed if talkback is on,

and the OSC symbol will be displayed if the oscillator

is on.

Hint

If the above operations occur simultaneously, they

will be displayed in the order of TB → OSC.

• COMM IN (Communication In)

If COMM IN is turned on in the MONITOR A

screen, the COMM IN symbol will be displayed on a

green background. In addition if a port is assigned to

COMM IN, the background of this symbol will

change to red when the input signal passes through

the COMM IN gate.

• LCR

The LCR symbol will be displayed if LCR is turned

on for at least one input channel or output channel

(in the LCR screen of the PAN/ROUTING or

MATRIX/ST function). In addition if the CENTER

BUS CONTROL button (in the LCR screen of the

PAN/ROUTING or MATRIX/ST function) is on, the

LCR [B] symbol will be displayed.

• RS422, MIDI, BUSY

- RS422

This symbol will be displayed when a response to a

transport command sent via the RS422 connector

is received.

- MIDI

This symbol will be displayed when a program

change or control change is received.

- BUSY

This symbol will be displayed during startup or

while internal memory or a PC card ﬁle is being

accessed.

Hint

• If the above states occur simultaneously, they will

be displayed in descending priority of RS422 →

MIDI → BUSY.

• The RS422 and MIDI symbols will remain visible

for approximately 200 msec after reception is com-

pleted.

• The BUSY symbol will disappear immediately

when access is completed.

• MANUAL FADE, AUTO FADE, TRACKING

ENABLE

- MANUAL FADE

This symbol will be displayed if Manual Fading is

enabled (even if a fade operation is not actually

being performed) (→p.76).

- AUTO FADE

This symbol will be displayed while Auto Fading is

being executed.

- TRACKING (Tracking Recall)

This symbol will be displayed if tracking recall is

enabled (the TRACKING RECALL button is set to

ENABLE in the TRACKING RECALL screen).

Hint

If the above states occur simultaneously, they will be

displayed in descending priority of MANUAL FADE

→ AUTO FADE → TRACKING.

1 2 3 4 5 6 7 8 9 10 11 12 ... 103 104

Comments to this Manuals

No comments

Yamaha PM1D Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Audio mixers Yamaha PM1D