Yamaha PM1D Owner's Manual Page 101

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 100
MIDI Data Format
101
1.2 EXCLUSIVE MESSAGE (F0-F7)
1.2.1 MOTION CONTROL STATE (MCS)
MMC STOP/PLAY/FORWARD/REWIND
<Transmission>
These messages are transmitted by assignment to USER DEFINE or
GPI.
[DEVICE NO.] specifies the transmission destination.
STATUS 11110000 F0 System Exclusive Message
ID No. 01111111 7F Real Time System Exclusive
Device ID 0ddddddd dd Destination (00-7E, 7F:all
call)
Command 00000110 06 Machine Control Com-
mand(mcc)sub-id
0ccccccc cc Command String
[1]:Stop
[3]:Deferred Play
[4]:Fast Forward
[5]:Rewind
EOX 11110111 F7 End of Exclusive
1.2.2 MOTION CONTROL PROCESS (MCP)
MMC LOCATE (target)
<Transmission>
This message is transmitted by assignment to USER DEFINE or GPI.
[DEVICE NO.] specifies the transmission destination. (This requires
setting the ID of the receiving device.)
STATUS 11110000 F0 System Exclusive Message
ID No. 01111111 7F Real Time System Exclusive
Device ID 0ddddddd dd Destination (00-7E, 7F:all
call)
Command 00000110 06 Machine Control Com-
mand(mcc)sub-id
01000100 44 Locate
00000110 06 byte count
00000001 01 "target" sub command
0tthhhhh th frame type, hour
0mmmmmmm mm minute
0sssssss ss second
0fffffff ff frame
0sssssss ss sub-frame(only'0')
EOX 11110111 F7 End of Exclusive
1.3 ACTIVE SENSING (Fe)
<Reception>
Once this message has been received, and there is an interval of
300 ms during which nothing is received, Running Status will be
cleared, and MIDI communication will be initialized.
STATUS 11111110 FE Active Sensing
2. TRANSMISSION CONDITION
3. RECEIVE CONDITION
4. PARAMETER CHANGE
BASIC FORMAT
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacture's ID
No.(YAMAHA)
SUB STATUS 0pppnnnn pn p=mode 1:parameter change
or response for request
3:parameter request
n=0-15(Device Channel
No.1-16)
GROUP ID 00111110 3e MODEL ID(digital mixer)
MODEL ID 00001001 09 Device code(PM1D)
PARAM TYPE 0ttttttt tt (TYPE)
DATA 0ddddddd dd0 DATA 0
: :
0ddddddd ddn DATA n
EOX 11110111 F7 End of Exclusive
PARAMETER VALUE REQUEST (type 0x00:Current Memory)
<Reception>
These messages can be received via the port that is enabled for recep-
tion. The VALUE RESPONSE message described below is sent in
reply to this message.
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacture's ID
No.(YAMAHA)
SUB STATUS 0pppnnnn 3n parameter request
n=0-15(Device Channel
No.1-16)
GROUP ID 00111110 3e MODEL ID(digital mixer)
MODEL ID 00001001 09 Device code(PM1D)
PARAM TYPE 00000000 00 Current Memory
DATA 0ttttttt dd0 data type
0aaaaaaa dd1 addressHIGH(BIT13-7)
0aaaaaaa dd2 addressLOW(BIT6-0)
0ddddddd dd3 REQUEST BYTE COUNT
EOX 11110111 F7 End of Exclusive
data type
0x00 SCENE LOW ADDRESS(BIT14 LOW)
0x10 SCENE HIGH ADDRESS(BIT14 HIGH)
0x0a ENGINE SETUP
PARAMETER VALUE RESPONSE (type 0x00:Current Memory)
<Transmission>
This message is sent in reply when the above VALUE REQUEST is
received.
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacture's ID
No.(YAMAHA)
SUB STATUS 0pppnnnn 1n response for request
MIDI Tx CH?
CONTROL CHANGE
BANK SELECT $BnH
CONTROL CHANGE
$BnH
CONTROL CHANGE
NRPN $BnH
SYTEM EXCLUSIVE
FUNCTION CALL
$F0H $43H $1nH
( RESPONSE FOR
PARAMETER REQUEST
$F0H $43H $1nH )
USER DEFINE,GPI
MMC $F0H $7FH $nnH $06H
MIDI IN
BANK ON
NRPN Tx ON
ASSIGN Tx ON
NRPN or ASSIGN Tx ON
PGM ECHO ON
MIDI OUT
PROGRAM CHANGE
$CnH
PGM Tx ON
MIDI Tx CH?
or
MULTI ON
MIDI Rx CH?
CONTROL CHANGE
BANK SELECT $BnH
CONTROL CHANGE
$BnH
CONTROL CHANGE
NRPN $BnH
SYSTEM EXCLUSIVE
PARAMETER REQUEST
$F0H $43H $3nH
MIDI IN
BANK ON
NRPN Rx ON
ASSIGN Rx ON
PGM ECHO ON
MIDI OUT
PROGRAM CHANGE
$CnH
PGM Rx ON
MIDI Rx CH?
or
MULTI ON
MIDI Rx CH?
or OMNI ON
or MULTI ON
Page view 100
1 2 ... 96 97 98 99 100 101 102 103 104

Comments to this Manuals

No comments