Yamaha PM1D Owner's Manual Page 62

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 61
PM1D System Software V1.5 Supplementary Manual
62
Mix send point
These jobs switch the pre-fader/post-fader selection for
the signal sent from an input channel to a MIX bus.
When you move the cursor to this parameter and press
the [SHIFT] + [ENTER] switches, the following popup
window will appear.
You can select the following jobs.
ALL POST [ALL MIX ]
ALL PRE [ALL MIX ]
The extraction point of the signals sent from the
selected channel to all MIX buses will simultaneously
be switched to post-fader or pre-fader.
ALL POST [ALL CH ]
ALL PRE [ALL CH ]
The extraction point of the signals sent from all
channels to the selected MIX bus will simultaneously
be switched to post-fader or pre-fader.
ALL POST [ALL CH x ALL MIX]
ALL PRE [ALL CH x ALL MIX]
The extraction point of the signals sent from all
channels to all MIX buses will be simultaneously be
switched to post-fader or pre-fader.
The above job is not valid for FIX type MIX buses.
If the channel on which you execute this job is
either side of an LR-MONO pair, the job will oper-
ate as for paired channels
Mix send level
Using these jobs, the value of the signal level that is sent
from an input channel to a MIX bus can be copied to
another channel. When you move the cursor to this
parameter and press the [SHIFT] + [ENTER] switches,
the following popup window will appear.
You can select the following jobs.
LEVEL COPY [ALL MIX ]
The value of the selected parameter will be copied to
the send level of the signal that is sent from that
channel to all MIX buses.
LEVEL COPY [ALL MIX ]
The value of the selected parameter will be copied to
the send level of the signal that is sent from all chan-
nels to that MIX bus.
LEVEL COPY [ALL CH x ALL MIX]
The value of the selected parameter will be copied to
the send level of the signal that is sent from all chan-
nels to all MIX buses.
The above job is not valid for FIX type MIX buses.
If the channel on which you execute this job is
either side of an LR-MONO pair, the job will oper-
ate as for paired channels
Mix send point Mix send level
Page view 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 103 104

Comments to this Manuals

No comments