Yamaha PM1D Owner's Manual download pdf (Page 55)

Input channel panel assignments

Switching the panel assign setting

1. Access the UTILITY function PANEL ASSIGN

screen.

2. Click the INITIALIZE button.

The settings of the PANEL ASSIGN screen will be

initialized (except for PRESET PATTERN MODE).

3. In the pattern display area, use the buttons for

the user patterns (patterns 2–4, 6–8) to specify the

channels that you want to assign to each pattern.

If desired, you may assign the same group of chan-

nels to more than one INPUT block, or combine

groups of input channels 1–48 with groups of input

channels 49–96.

4. For the pattern that you want to use, switch the

ENABLE/DISABLE button to “ENABLE.” The

selected pattern will be registered in the pattern

list, in the order of its pattern number.

5. Turn on the PATTERN CHANGE button of the

MODULE FLIP BUTTON MODE section.

Now you can use the MODULE [FLIP] switch to

change the panel assign pattern.

6. Press the MODULE [FLIP] switch.

The patterns registered in the pattern list will change

sequentially.

Hint

If you select a preset pattern (pattern 1, 5), the

[FLIP] switch LED will go dark. If you select a user

pattern (pattern 2–4, 6–8), the [FLIP] switch LED

will light.

7. If you don’t want the MODULE [FLIP] switch to

affect the left and right sides of the panel in tan-

dem, turn off the MODULE FLIP/PATTERN

CHANGE LINK button.

In this case, you can assign the RIGHT SIDE PANEL

FLIP function to a USER DEFINE switch (or to GPI

IN), and use that USER DEFINE switch (or GPI IN)

to operate fader ﬂip for the right side.

Hint

If patterns 1 and 5 are registered in the pattern list,

you can use the GLOBAL LAYER [1-48]/[49-96]

switches to select patterns 1 and 5. Press the GLO-

BAL LAYER [1-48] switch to select pattern 1, or the

[49-96] switch to select pattern 5.

If you placed the same input channels in a different

INPUT block, you can use the [SEL] switches of

either block to set/defeat pairing. Also note that the

[SEL] switches of adjacent channels will set/defeat

pairing when they are pressed simultaneously even

if the switches are in different blocks.

Hint

An INPUT [PANEL] button has been added to the

DISPLAY SELECT section of the TRACKING

RECALL screen.

If the INPUT [PANEL] button is pressed, the offset

display of the TRACKING RECALL screen will be

arranged in the same order as the console layout

speciﬁed by panel assign. Since the order is the same

as the console layout, operation and checking will be

easier.

However, it is not possible to press this button in

PM1D Manager since it does not have a panel assign

function.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 103 104

Comments to this Manuals

No comments

Yamaha PM1D Owner's Manual Page 55

Comments to this Manuals

Related products and manuals for Audio mixers Yamaha PM1D