Yamaha PM1D Owner's Manual download pdf (Page 5)

Additions/changes in V1.5

■

Operate parameters via control

changes

Now you can use MIDI control changes to remotely

control PM1D parameters from an external device,

or transmit console operations as control changes

(

→

p.71).

■

Manual fading

A new “Manual Fading” function has been added.

When recalling a scene for which a fade time has

been set, you can now use the [DATA] encoder to

fade in the positive or negative direction. This is con-

venient when you want to vary the volume in con-

junction with action on stage (

→

p.76).

■

Unit name

You can now assign a unit name to each port of an

input/output unit or card. If necessary, the unit

name of each port can be displayed in the ﬁeld in

which the short name of an input channel was shown

in the screen (

→

p.79).

■

Matrix send shortcut

The send level from a MIX channel or STEREO A/B

channel to a MATRIX channel can now be controlled

from a panel encoder (

→

p.82).

■

DCA mute indicator

When you mute a DCA group, the [ASSIGN DCA]

LED of the channels associated with that DCA can

now be made to blink if desired. This is convenient

when you want to know which channels are actually

being muted (

→

p.85).

■

Improved oscillator

The oscillator now lets you use two sine waves simul-

taneously. You can specify the frequency and level for

each, and output them independently to odd-num-

bered / even-numbered channels (

→

p.86).

■

Improvements in the INPUT PATCH /

OUTPUT PATCH screens

The unit name of each port is now displayed in the

UNIT PATCH / OUTPUT PATCH screens. Vertical

and horizontal red lines can also indicate the cur-

rently selected grid (

→

p.89).

■

USB connection to a PC

In addition to the serial connection supported on

earlier versions, you can now use a USB connection

to connect the PM1D to a PC (

→

p.89).

■

Improved operation in the CH to MIX

and MATRIX/ST ROUTING screens

Cursor movement now follows scrolling in the CH to

MIX function of the PAN/ROUTING function and

in the MATRIX/ST ROUTING screen of the

MATRIX/ST function (

→

p.90).

■

ON/OFF button added to COMM IN

The COMM IN function can now be turned ON/

OFF independently (

→

p.91).

■

Additional functions in the PREFER-

ENCE screen

A variety of setting items have been added in the

PREFERENCE screen (

→

p.92).

■

Channel selection can now be sepa-

rately speciﬁed for the AUTO DISPLAY

function (SELECTED CH ON/OFF but-

ton)

One of the AUTO DISPLAY functions automatically

moves the cursor to the corresponding parameter

when you switch the channel that is being operated.

In the PREFERENCE screen AUTO DISPLAY sec-

tion, this function can now be switched on/off inde-

pendently of the other AUTO DISPLAY items

(

→

p.92).

1 2 3 4 5 6 7 8 9 10 ... 103 104

Comments to this Manuals

No comments

Yamaha PM1D Owner's Manual Page 5

Comments to this Manuals

Related products and manuals for Audio mixers Yamaha PM1D