Yamaha PM1D Owner's Manual download pdf (Page 32)

PM1D System Software V1.5 Supplementary Manual

For example if you select the MIX 1 button, the MIX

bus 1 pre-fader signal will be sent from one engine to

the other engine, and will be mixed with the MIX

bus 1 pre-fader signal of the other engine. In the

same way, the pre-fader signal of MIX bus 1 pre-

fader signal of the other engine will be sent to the

ﬁrst engine, and mixed with the MIX bus 1 pre-fader

signal.

Hint

In order to compensate for phase differences of the

input signal when the MIX bus, STEREO bus, and

CUE bus are cascade-connected, the corresponding

bus outputs will be delayed by two samples (for the

MIX buses / STEREO buses) or three samples (for

the CUE bus) more than the previous version. These

signals will always be delayed even if cascade is

turned off.

When cascade-connecting the CUE bus, talkback,

and COMM IN, you can make these selections inde-

pendently for console 1 and 2. (Console 2 is valid

only in Dual Console mode.) For example if the

CONSOLE 1 button in the CUE area is turned on,

the console 1 CUE bus signal will be cascade-con-

nected between the two systems.

If cascade-connection is enabled for the talkback sig-

nal, talkback on/off operations will also be linked

between the two systems.

8. To cancel cascade connection, access the SYSTEM

CONFIGURATION popup window, and click the

CASCADE OFF button of the CASCADE MODE

SELECT section.

OUTPUT

INOUT

OUTIN

MIX BUS 1

CASCADE BUS

ON/OFF

FADER,

PATCH etc.

DELAY

OUTPUT

MIX BUS 1

CASCADE BUS

ON/OFF

FADER,

PATCH etc.

DELAY

Master engine Slave engine

cascade

connection

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 103 104

Comments to this Manuals

No comments

Yamaha PM1D Owner's Manual Page 32

Comments to this Manuals

Related products and manuals for Audio mixers Yamaha PM1D