Yamaha YXR660FAS Service Manual Page 99

  • Download
  • Add to my manuals
  • Print
  • Page
    / 421
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 98
3 - 22
CHK
ADJ
CHANGING THE COOLANT
CAUTION:
Adding water instead of coolant lowers
the antifreeze content of the coolant. If
water is used instead of coolant, check,
and if necessary, correct the antifreeze
concentration of the coolant.
Use only distilled water. However, soft
water may be used if distilled water is not
available.
If coolant comes into contact with painted
surfaces, immediately wash them with
water.
Do not mix different types of antifreeze.
17.Install:
air bleed bolt
18.Install:
radiator cap
T
R
.
.
9 Nm (0.9 m
·
kg, 6.5 ft
·
lb)
19.Fill:
coolant reservoir
(with the recommended coolant to the maxi-
mum level mark a)
20.Install:
coolant reservoir cap
21.Start the engine, warm it up for several min-
utes, and then turn it off.
22.Check:
coolant level
Refer to CHECKING THE COOLANT
LEVEL.
NOTE:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
23.Close the hood.
24.Install:
console
passenger seat
driver seat
Refer to SEATS, ENCLOSURE, HOOD
AND CARGO BED in chapter 8.
Page view 98
1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 420 421

Comments to this Manuals

No comments