4 - 90
ENG
MIDDLE GEAR
4. Remove:
• bearing housing assembly 1
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Clean the outside of the bearing housing
assembly.
b. Place the bearing housing assembly onto a
hydraulic press.
CAUTION:
• Never directly press the middle driven
pinion gear end with a hydraulic press,
this will result in damage to the middle
driven pinion gear thread.
• Install the suitable socket
2
on the mid-
dle driven pinion gear end to protect the
thread from damage.
c. Press the middle driven pinion gear end
and remove the bearing housing.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
5. Remove:
• bearing retainer
• bearing
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Place a rag 1 in the vise.
b. Secure the bearing housing edge in the
vise.
c. Attach the bearing retainer wrench 2.
CAUTION:
The middle driven shaft bearing retainer
has left-handed threads. To loosen the
retainer, turn it clockwise.
d. Remove the bearing retainer and bearing.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
Bearing retainer wrench
P/N. YM-04128, 90890-04128
Comments to this Manuals