Yamaha YXR660FAS Service Manual download pdf (Page 264)

7 - 13

DRIV

FRONT CONSTANT VELOCITY JOINTS, DIFFERENTIAL

GEAR AND DRIVE SHAFT

b. Connect two C size batteries to the gear

motor terminal 2 to operate the pinion gear

3. Operate the pinion gear until the paint

mark 4 on the gear is aligned with the paint

mark 5 on the gear motor case.

CAUTION:

Do not use a 12 V battery to operate the

pinion gear.

c. Insert 8 mm bolts 6 into the gear motor 7

and use them as a guide to set the motor on

the differential gear assembly 8 so that the

shift fork sliding gear 9 does not move.

CAUTION:

If the position of the shift fork sliding gear

is moved, the position of the differential

gear and the indicator light display may dif-

fer, and the 2WD or differential lock mode

may not be activated.

d. Remove the 8 mm bolts, and then install the

motor with the gear motor bolts.

▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲

T

R

.

.

Gear motor bolts

13 Nm (1.3 m · kg, 9.4 ft · lb)

3. Install:

• universal joint yoke

• O-ring

• washer

• nut

Use a universal joint holder 1.

NOTE:

Apply locking agent (LOCTITE

®

) to the nut

threads.

Universal joint holder

P/N. YM-04062, 90890-04062

T

R

.

.

62 Nm (6.2 m · kg, 45 ft · lb)

1 2 ... 259 260 261 262 263 264 265 266 267 268 269 ... 420 421

Comments to this Manuals

No comments