9 - 18
– +
ELEC
ELECTRIC STARTING SYSTEM
TURNS
3. Starter motor
• Connect the battery (+) terminal
1
and
starter motor cable
2
using a jumper lead
3
.
• Check the operation of the starter motor.
*
WARNING
• A wire that is used as a jumper lead must
have the equivalent capacity or more as
that of the battery lead, otherwise the
jumper lead may burn.
• This check is likely to produce sparks, so
be sure that no flammable gas or fluid is
in the vicinity.
DOES NOT TURN
Repair or replace the starter motor.
CONTINUITY
4. Starter relay
• Remove the starter relay from the wire
harness.
• Connect the pocket tester (
Ω
×
1) and the
battery (12 V) to the starter relay termi-
nals.
Battery (+) terminal
→
Yellow/Blue terminal
1
Battery (–) terminal
→
Blue/Black terminal
2
Tester (+) lead
→
Red terminal
3
Tester (–) lead
→
Black terminal
4
• Check the starter relay for continuity.
NO CONTINUITY
Replace the starter relay.
CORRECT
5. Main switch
Refer to “CHECKING THE SWITCH”.
*
INCORRECT
Replace the main switch.
Comments to this Manuals