3 - 15
CHK
ADJ
CHANGING THE ENGINE OIL
b. Lubricate the O-ring 3 of the new oil filter
cartridge with a thin coat of lithium-soap-
based grease.
CAUTION:
Make sure that the O-ring
3
is positioned
correctly in the groove of the oil filter car-
tridge.
c. Tighten the new oil filter cartridge to specifi-
cation with an oil filter wrench.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
T
R
.
.
Oil filter cartridge
17 Nm (1.7 m · kg, 12 ft · lb)
6. Install:
• engine oil drain bolt 1
7. Fill:
• crankcase
(with sufficient oil to reach the specified
level)
Refer to “CHECKING THE ENGINE OIL
LEVEL”.
8. Install:
• engine oil filler plug
9. Warm up the engine for a few minutes, then
stop the engine.
10.Check:
• engine
(for engine oil leaks)
• oil level
Refer to “CHECKING THE ENGINE OIL
LEVEL”.
Oil quantity
Periodic oil change
2.10 L (1.85 Imp qt, 2.22 US qt)
With oil filter replacement
2.20 L (1.94 Imp qt, 2.33 US qt)
Total amount
2.40 L (2.11 Imp qt, 2.54 US qt)
T
R
.
.
30 Nm (3.0 m
·
kg, 22 ft
·
lb)
Comments to this Manuals