Yamaha YXR660FAS Service Manual download pdf (Page 275)

7 - 24

DRIV

REAR CONSTANT VELOCITY JOINTS, FINAL DRIVE

GEAR AND DRIVE SHAFT

ASSEMBLING THE REAR CONSTANT

VELOCITY JOINTS

1. Apply:

• molybdenum disulfide grease

(into the ball joint assembly)

2. Install:

• dust boots 1

• boot bands 2, 3

▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼

a. Apply molybdenum disulfide grease into the

dust boots.

b. Install the dust boots.

c. Install the dust boot bands.

NOTE:

• The new boot bands may differ from the orig-

inal ones.

• The dust boots should be fastened with the

boot bands 3 at the grooves in the joint

shaft.

▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲

Molybdenum disulfide grease

40 g (1.8 oz) per dust boot (rear

wheel side)

60 g (2.3 oz) per dust boot (final

gear case side)

New

3. Check:

• free play (thrust movement)

Excessive play → Replace the joint assem-

bly.

DISASSEMBLING THE FINAL GEAR CASE

1. Remove:

• drive shaft coupling nut

▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼

a. Place a folded rag 1.

b. Secure the drive shaft coupling edge in the

vise.

c. Remove the drive shaft coupling nut.

▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲

1 2 ... 270 271 272 273 274 275 276 277 278 279 280 ... 420 421

Comments to this Manuals

No comments