Yamaha YXR660FAS Service Manual Page 263

  • Download
  • Add to my manuals
  • Print
  • Page
    / 421
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 262
7 - 12
DRIV
FRONT CONSTANT VELOCITY JOINTS, DIFFERENTIAL
GEAR AND DRIVE SHAFT
2. Install:
dust boots 1
boot bands 2, 3
▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼
a. Apply molybdenum disulfide grease into the
dust boots.
b. Install the dust boots.
c. Install the dust boot bands.
NOTE:
The new boot bands may differ from the orig-
inal ones.
The dust boots should be fastened with the
boot bands 3 at the grooves in the joint
shaft.
▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲ ▲▲▲
3. Check:
free play (thrust movement)
Excessive play Replace the joint assem-
bly.
Molybdenum disulfide grease
40 g (1.4 oz) per dust boot (front
wheel side)
45 g (1.6 oz) per dust boot (dif-
ferential gear case side)
New
ASSEMBLING THE DIFFERENTIAL GEAR
1. Measure:
gear lash
Refer to MEASURING AND ADJUSTING
THE DIFFERENTIAL GEAR LASH.
2. Install:
gear motor
▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼
a. Slide the shift fork sliding gear 1, which is
installed to the differential gear, to the right
to put it into the 2WD mode.
Page view 262
1 2 ... 258 259 260 261 262 263 264 265 266 267 268 ... 420 421

Comments to this Manuals

No comments