Yamaha V2 Owner's Manual download pdf (Page 19)

M7CL V2 Editor Owner’s Manual

A MIX/CH/ST IN (Send levels from the MIX/INPUT CH/ST IN to

the MATRIX bus)

This switches between indicating the sends from MIX channels 1–16, the sends from

INPUT CH 1–16 / 17–32 / 33–48

(

)

, and the sends from ST IN.

The bar graphs located immediately below the button indicate/adjust the level of the

signal that is sent from each channel to the MATRIX bus. The method of operation and

the meaning of the display are the same as for (

5) MATRIX in the MIX window

(➥ p.17).

(

)

INPUT CH 33–48 can be viewed only if 48 is selected in the Input Channels ﬁeld of the Mixer Setup

window when editing ofﬂine, or when editing online with the M7CL-48.

B STEREO (Send levels from the STEREO channels to the MATRIX

bus)

Here you can view and edit the send levels of the signals sent from the STEREO chan-

nels to the MATRIX bus. While you drag the bar graph, the send level is shown in the

numerical display area immediately below. The method of operation and the meaning

of the display are the same as for (

5) MATRIX in the MIX window (➥ p.17).

C EQ (Equalizer)

Switches the EQ on/off. The graph immediately below the button shows the approxi-

mate response of the EQ. This is the same as the equalizer for INPUT CH (➥ p.12).

D DYN1(Dynamics 1)

Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT

CH (➥ p.12).

E INS (Insert)

Enables/disables the insert-in.

F SEL (Select)

Selects the MATRIX channel for which you want to make settings.

G CUE

This button cue-monitors the signal of the MATRIX channel.

H ON

This switches the MATRIX channel on/off.

I Fader

This adjusts the output level of the MATRIX channel. The current fader value is shown

in the numeric box immediately below the fader.

The numbers and alphabetical letters at the right of the fader indicate the mute groups

to which that channel belongs, and show the Recall Safe and Mute Safe status of the

channel. (For the signiﬁcance of the numbers and alphabetical letters, see ➥ p.13).

J Channel number

Indicates the number of the MATRIX channel. You can double-click this number to

open the Selected Channel window for this channel. If you hold down the <Ctrl> key of

your computer keyboard and double-click this, the Selected Channel window will open

as an additional view.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 72 73

Comments to this Manuals

No comments

Yamaha V2 Owner's Manual Page 19

Comments to this Manuals

Related products and manuals for Audio equalizers Yamaha V2