Yamaha V2 Owner's Manual download pdf (Page 33)

M7CL V2 Editor Owner’s Manual

❏ RECALL SAFE/MUTE SAFE

These enable/disable Recall Safe and Mute Safe for the channel.

❏ DCA GROUP/MUTE GROUP

A DCA GROUP

Selects the DCA group (1–8) to which that channel belongs.

BMUTE GROUP

Selects the mute group (1–8) to which that channel belongs.

❏ Fader

A ON

Switches the input channel on/off. This is linked with the INPUT section CH [ON] keys

on the M7CL’s panel.

B Fader

Adjusts the input level of the input channel. This is linked with the INPUT section fad-

ers of the M7CL’s panel. A meter indicating the signal level is shown at the right of the

fader, and the current value is shown in the numerical box immediately below. You can

set this to the minimum value (–∞ dB) by holding down the <Ctrl> key of your com-

puter keyboard and clicking the fader knob, or set it to the nominal value (0.00 dB) by

holding down the <Ctrl> key and <Shift> key and clicking the fader knob.

C CUE

This button cue-monitors the signal of the input channel. This is linked with the

INPUT section [CUE] keys on the M7CL’s panel.

1 2

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 72 73

No comments

Yamaha V2 Owner's Manual Page 33