Yamaha V2 Owner's Manual download pdf (Page 3)

M7CL V2 Editor Owner’s Manual

❏

Mixer Setup

To open the Mixer Setup window, choose [Mixer Setup] from the [File] menu.

Input Channels

Specify the number of input channels on the M7CL console. When the editor is synchronized with the M7CL

console, the actual number of channels on the M7CL console will automatically be speciﬁed here.

Mix Bus Setup

Here you can make settings relating to the MIX buses.

Signal Type:

Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered MIX

buses.

Bus Type/Send Point:

Choose either VARI (PRE FADER) or VARI (PRE EQ) or FIXED for each two adja-

cent odd-numbered/even-numbered MIX buses.

Pan Link:

This is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI. If this is

enabled, the pan setting sent to stereo MIX buses will be linked with the pan setting to the STEREO bus.

Matrix Bus Setup

Here you can make settings relating to the MATRIX buses.

Signal Type:

Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered

MATRIX buses.

Bus Type/Send Point:

Choose either PRE FADER or PRE EQ for each two adjacent odd-numbered/even-

numbered MATRIX buses.

Pan Link:

This is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI. If this is

enabled, the pan setting sent to stereo MATRIX buses will be linked with the pan setting to the STEREO bus.

1 2 3 4 5 6 7 8 ... 72 73

No comments

Yamaha V2 Owner's Manual Page 3