Yamaha V2 Owner's Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 73
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
M7CL V2 Editor Owner’s Manual
13
K PAN/TO STEREO MONO
The PAN knob adjusts the panning of the signal that is sent from the INPUT CH to the
STEREO bus L/R channels (or the L/C/R channels). You can set this to the center value
by holding down the <Ctrl> key of your computer keyboard and clicking this knob.
The [ST] button is an on/off switch for the signal that is sent from the INPUT CH to
the STEREO bus.
The [M(C)] button is an on/off switch for the signal that is sent from the INPUT CH to
the MONO bus.
If LCR MODE is selected in the Selected Channel window, the [LCR] button will appear
instead of the [ST] button and [M(C)] button, and the [LCR] button will be an on/off
switch for the signal that is sent from the INPUT CH to the LCR bus.
L SEL (Select)
Selects the INPUT CH for which you want to perform operations. This is linked with
the INPUT section [SEL] keys on the M7CLs panel.
M CUE
This button cue-monitors the signal of the INPUT CH. This is linked with the INPUT
section [CUE] keys on the M7CLs panel.
N ON
Switches the INPUT CH on/off. This is linked with the INPUT section [ON] keys on
the M7CLs panel.
O Fader
Adjusts the input level of the INPUT CH. When the M7CL itself is in other than SENDS
ON FADER mode, this is linked with the INPUT section faders of the M7CLs panel.
The current fader value is shown in the numerical box located immediately below the
fader.
You can set this to the minimum value (– dB) by holding down the <Ctrl> key of
your computer keyboard and clicking the fader knob, or set it to the nominal value
(0.00 dB) by holding down the <Ctrl> key and <Shift> key and clicking the fader knob.
The numbers and alpha-
betical letters at the right
of the fader indicate the
DCA group and mute
groups to which that
channel belongs, and
show the Recall Safe and
Mute Safe status of the
channel.
P Channel number
This is the number of the INPUT CH. You can open the Selected Channel window for
this channel by double-clicking this number. If you hold down the <Ctrl> key of your
computer keyboard and double-click this, the Selected Channel window will open as an
additional view.
Q Channel name
This is a text box that displays the channel name. You can also edit the channel name in
this text box.
L
M
N
P
O
Q
K
The numbers of DCA groups to which this
channel belongs are shown in yellow.
The numbers of mute groups to which this
channel belongs are shown in red.
If this channel is set to Recall Safe, the R
character is shown in green.
If this channel is set to Mute Safe, the M char-
acter is shown in green.
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 72 73

Comments to this Manuals

No comments