Yamaha V2 Owner's Manual download pdf (Page 22)

M7CL V2 Editor Owner’s Manual

DCA window

In this window you can view and edit the parameters of DCA groups 1–8.

You can access this window in the following ways.

● From the [Windows] menu, choose [Overview] and then choose “DCA”

● Use the navigation keys in the Master window to turn on the [DCA] button

A CUE

This button cue-monitors all channels that are assigned to the DCA group.

B ON

If you turn this on, all channels assigned to the DCA group will be turned on. If you

turn this off, no signal will be output from the channels assigned to the DCA group.

C DCA fader

This fader adjusts the level of the DCA group.

The current fader value is shown in the numeric box immediately below the fader.

You can set this to the minimum value (–∞ dB) by holding down the <Ctrl> key of

your computer keyboard and clicking the fader knob, or set it to the nominal value

(0.00 dB) by holding down the <Ctrl> key and <Shift> key and clicking the fader knob.

If the fader is at nominal level, the green indicator at the right of the fader will light.

If a DCA group is set to Recall Safe, the R character at the lower right of the fader is dis-

played in green.

D DCA number

This is the number of the DCA group.

E DCA group name

This is a text box that displays the DCA group name. You can also edit the DCA group

name in this text box.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 72 73

No comments

Yamaha V2 Owner's Manual Page 22