Yamaha V2 Owner's Manual download pdf (Page 23)

M7CL V2 Editor Owner’s Manual

Here you can set the parameters of the currently selected input channel (INPUT CH 1–48

(

)

, ST IN channels 1–4) or

output channel (MIX channels 1–16, MATRIX channels 1–8, STEREO/MONO channels).

You can access this window in the following ways.

● From the [Windows] menu, choose [Selected Channel] and select “MAIN VIEW”

● Double-click the channel number in one of the Overview windows

● On the M7CL itself, assign one of the USER DEFINED KEYS to [1-16]/[17-32]/[33-48]

(

)

in [SEL CH] of [M7CL EDI-

TOR CONTROL], and execute the function

By choosing [Selected Channel] from the [Windows] menu and then selecting “ADDITIONAL VIEW,” you

can view a window for a channel that is not selected. This ADDITIONAL VIEW is not linked with [SEL] key

operations on the panel of the M7CL.

The type of parameters that can be edited in this window depends on the type of the currently selected channel. The

parameters of the Selected Channel window are explained below, in the order of input channels (input channels 1–

48, ST IN channels 1–4), MIX channels, MATRIX channels, and STEREO/MONO channels.

(

)

INPUT CH 33-48 can be viewed only if 48 is selected in the Input Channels ﬁeld of the Mixer Setup window when editing ofﬂine, or

when editing online with the M7CL-48.

If an input channel is selected

Selected Channel window

NOTE

● INPUT CH window

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 72 73

No comments

Yamaha V2 Owner's Manual Page 23