Yamaha F150 Service Manual download pdf (Page 50)

CHK

ADJ

Periodic checks and adjustments

3-5

63P3F11

6. Install the oil filler cap and dipstick, and

then start the engine and warm it up for 5

minutes.

7. Turn the engine off, and then check the

oil level and correct it if necessary.

Changing the engine oil by draining

it

1. Start the engine, warm it up, and then

turn it off.

2. Remove the engine oil dipstick and oil

filler cap

1

.

3. Place a drain pan under the drain hole,

and then remove the drain bolt

2

and let

the oil drain completely.

NOTE:

Be sure to clean up any oil spills.

4. Install the drain bolt, and then tighten it to

the specified torque.

5. Pour the specified amount of the recom-

mended engine oil into the oil filler hole.

6. Install the oil filler cap and dipstick, and

then start the engine and warm it up for 5

minutes.

7. Turn the engine off, and then check the

oil level and correct it if necessary.

Replacing the oil filter

1. Extract the engine oil with an oil changer

or drain it.

2. Place a rag under the oil filter, and then

remove the oil filter using a 72.5 mm (2.9

in) oil filter wrench.

NOTE:

• Wait more than 5 minutes after turning the

engine off to replace the oil filter.

• Be sure to clean up any oil spills.

3. Apply a thin coat of engine oil to the O-

ring of the new oil filter.

4. Install the oil filter, and then tighten it to

the specified torque using a 72.5 mm

(2.9 in) oil filter wrench.

T

R

.

.

Drain bolt:

27 N·m (2.7 kgf·m, 20.0 ft·lb)

Recommended engine oil:

4-stroke motor oil

API: SE, SF, SG, SH, or SJ

SAE: 10W-30 or 10W-40

Oil quantity:

Without oil filter replacement:

5.2 L (5.5 US qt, 4.6 Imp qt)

Oil filter wrench

1

: 90890-06830

S63P3090

1

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 312 313

Comments to this Manuals

No comments