Yamaha F150 Service Manual Page 276

  • Download
  • Add to my manuals
  • Print
  • Page
    / 313
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 275
ELEC
Electrical systems
+
8-17
63P3F11
Checking the injectors
1. Measure the resistance of the fuel injec-
tors. Replace if out of specification.
NOTE:
Check the operation of the fuel injectors
using the Stationary test of the Yamaha
Diagnostic System.
Checking the main relay
1. Remove the fuse holder cover, and then
remove the fuse holder.
2. Connect the digital circuit tester leads to
the main relay terminals
1
and
2
.
3. Connect the positive battery terminal to
the main relay terminal
1
.
4. Connect the negative battery terminal to
the main relay terminal
3
.
5. Check for continuity between the main
relay terminals. Replace if there is no
continuity.
6. Check that there is no continuity between
the relay terminals after disconnecting a
battery terminal from the main relay ter-
minals
1
and
3
. Replace if there is con-
tinuity.
Checking the electric fuel pump
1. Turn the engine start switch to ON.
2. Listen for the operating sound of the
electric fuel pump
1
. Check the fuel sys-
tem if there is no sound.
NOTE:
After the engine start switch is turned to ON,
the electric fuel pump will operate for 3 sec-
onds.
Digital circuit tester: 90890-03174
Fuel injector resistance
(use as reference):
14.015.0
at 20 °C (68 °F)
S60V8450
3
1
2
Page view 275
1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 312 313

Comments to this Manuals

No comments