
63P3F11
6-60
1
2
3
4
5
6
7
8
9
8. Measure the propeller shaft free play.
Repeat steps 1–7 if out of specification.
Backlash
(counter rotation model)
6
Measuring the forward and reverse
gear backlash
1. Remove the water pump assembly.
2. Set the gear shift to the neutral position
at the lower unit.
3. Install the special service tools so that it
pushes against the propeller shaft.
NOTE:
Tighten the center bolt while turning the drive
shaft until the drive shaft can no longer be
turned.
4. Install the backlash indicator onto the
drive shaft (22.4 mm [0.88 in] in diame-
ter), then the dial gauge onto the lower
unit.
Propeller shaft free play:
0.25–0.35 mm (0.0098–0.0138 in)
Magnet base B
8
: 90890-06844
Dial gauge set
9
: 90890-01252
Shift rod push arm: 90890-06052
Bearing housing puller claw L
1
:
90890-06502
Stopper guide plate
2
: 90890-06501
Center bolt
3
: 90890-06504
Shimming (counter rotation model) / Backlash (counter rotation model)
Comments to this Manuals