Yamaha AW2816 Owner's Manual download pdf (Page 96)

Using the internal effects

Operation section

Move the cursor to the ASSIGN button of

the EFFECT INSERT area, and press the

[ENTER] key.

The EFF.INSERT SETTING popup window will

appear. In this popup window you can use the

following four buttons to select the to insert

effect.

• OFF................... Cancel effect insertion.

• INT.EFF1 ........... Insert effect 1.

• INT.EFF2 ........... Insert effect 2.

• EXTERNAL......... Insert an external effect.

To insert effect 2, move the cursor to the

INT.EFF2 button, and press the [ENTER]

key.

The SEND area in the popup window will

change to “EFF2,” and the RTN. area will change

to “EFF 2L.” This indicates that the input of effect

2 is patched to the insert send of monitor channel

1, and the L output of effect 2 is patched to the

insert return.

Tip!

• By moving the cursor to the RTN. area and turning

the [DATA/JOG] dial, you can switch between “EFF

2L” and “EFF 2R.”

• If you insert an effect into a stereo channel (return

channel 1/2 or the stereo output channel), the L/R

outputs of the effect will be returned to the L/R

inputs of the channel.

When you have ﬁnished making settings,

move the cursor to the OK button and

press the [ENTER] key.

The popup window will close, and the EFFECT

INSERT area will indicate “ON [INT.EFF2].” This

means that that effect 2 is inserted into the corre-

sponding channel (in this example, monitor

channel 1).

Tip!

To cancel the insertion, turn on the OFF button in the

EFF.INSERT SETTING popup window. Also, a popup

window asking you to conﬁrm cancellation of the

insertion will appear if you insert effect 2 into

another channel.

Recalling an effect program

Here’s how to recall an effect program for use by

effect 2.

Press the [AUX 6] key → [F2] key.

The AUX6/EFF2 screen Library page will appear.

Use the [DATA/JOG] dial to select the effect

program that you want to recall.

Move the cursor to the RECALL button and

press the [ENTER] key.

The selected program will be recalled to effect 2.

Press the [F1] key.

The Eff.Edit page will appear.

Move the cursor to the MIX BAL. knob,

and turn the [DATA/JOG] dial to adjust the

balance between the original sound and

the effect sound.

When you insert an internal effect into a speciﬁc

channel, use the Eff.Edit page MIX BAL. knob to

adjust the balance between the original sound

and the effect sound. Adjust this setting to an

appropriate level as necessary.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 419 420

Comments to this Manuals

No comments

Yamaha AW2816 Owner's Manual Page 96

Comments to this Manuals

Related products and manuals for Receiver Yamaha AW2816