Yamaha AW2816 Owner's Manual download pdf (Page 139)

133

Chapter

Using automix

Operation section

Using automix

This chapter explains the functions and operation of Automix, which

automates realtime mixing operations.

About automix

What is automix?

On the AW2816, operations of mixing parameters can

be recorded in realtime, and then played back. This

capability is called “automix.” Scene recall opera-

tions, channel fader movements, and [ON] key opera-

tions etc. can be recorded in automix as the song

progresses, allowing the mixdown to be completely

automated.

The currently-operated automix is called the “current

automix.” The contents of the current automix can be

stored in one of sixteen special memory areas, and

recalled at any time. Data for the sixteen automixes in

memory is saved on the hard disk as part of the cur-

rently-selected song (the “current song”).

What can be recorded in auto-

mix?

The following operations can be recorded in automix.

• Fader operations of each channel (including

operations of the [RTN 1]/[RTN 2] controls)

• AUX send operations of each channel

• [ON] key operations of each channel

• Pan operations of each channel

• EQ operations of each channel

• Scene memory and library recall operations

• REMOTE screen fader 1–8 and [ON] key opera-

tions

While the song plays back, the above operations can

be recorded on the automix in realtime, or you can

partially re-record speciﬁc operations by themselves.

When automix is stopped, you can also edit the tim-

ing and values of individual recorded data events.

How the automix is related to the

song

In general, automix operation is linked with the song.

When you play back the song, the automix will also

begin playing or recording, and when you stop the

song, the automix will also stop. Although it is possi-

ble to stop only the automix while the song is playing,

it is not possible to record or play back the automix

while the song is stopped.

Automix always begins at the Start Point of the song

(the absolute time zero location). For this reason if you

change the start point, the starting location of automix

will change accordingly. If you want to change the

start point, you should make this change before you

record the automix.

Be aware that if you change the start point, automix

cannot be recorded in the area earlier than the start

point (absolute time zero).

00:00:00:00.00 00:00:05:00.00

00:00:00:000 00:00:05:000

00:00:10:00.00

00:00:10:000

Start point = 00:00:00:00.00

Automix

Start point = 00:00:05:00.00

00:00:00:00.00 00:00:05:00.00

–00:00:05:000 00:00:00:000

00:00:10:00.00

00:00:05:000

Time display

(ABS)

Time code

display (ABS)

Song

Time display

(ABS)

Time code

display (ABS)

Song

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 419 420

Comments to this Manuals

No comments

Yamaha AW2816 Owner's Manual Page 139

Comments to this Manuals

Related products and manuals for Receiver Yamaha AW2816