Yamaha AW2816 Owner's Manual download pdf (Page 102)

Transport/Locate operations

Chapter

Operation section

Searching for a point while you listen

(the Nudge function)

“Nudge” is a function that repeatedly plays back a

short region before or after the current location. By

using this function, you can listen as you move the

current location in small steps to ﬁnd a desired point.

This is convenient when you need to specify a loca-

tion accurately, such as when specifying the auto

punch-in/out points, or when specifying a range for

track editing.

Use the transport or the shuttle function to

locate to the approximate point you want

to ﬁnd.

With the transport stopped, press the [JOG

ON] key.

The [JOG ON] key will light, and the Nudge

function will be turned on. The audio will be

played back repeatedly, starting at the current

location and continuing for a speciﬁed length of

time (100 msec by default).

To move the current location forward, turn

the [DATA/JOG] dial toward the right. To

move it backward, turn the [DATA/JOG]

dial toward the left.

The current location will move in millisecond

units if time display is selected as the counter dis-

play method, or in sub-frame units if timecode

display is selected. You can also use the [SHUT-

TLE] dial to move the current location rapidly.

If measure display is selected as the counter display

method, the current location will move in steps of one

beat when the [DATA/JOG] dial is turned.

To defeat the Nudge function, press the

[JOG ON] key or the transport section

STOP [ ] key.

The [JOG ON] key will go dark, and the Nudge

function will be defeated.

To change the playback time or playback

direction of the Nudge function, press the

[UTILITY] key → [F3] key.

The UTILITY screen Prefer.2 page will appear. In

the NUDGE area of this page, you can change

the nudge time (the duration of the repeated

playback) and play mode (playback direction).

To adjust the nudge time, move the cursor

to the TIME ﬁeld of the NUDGE area, and

use the [DATA/JOG] dial to set the nudge

time.

The nudge time can be speciﬁed in the range of

25 ms–800 ms (default= 100 ms).

To change the play mode, move the cursor

to the PLAY MODE button in the NUDGE

area, and press the [ENTER] key to switch

between the following two play modes.

• AFTER

Playback will repeat over an area corresponding

to the nudge time and starting at the current loca-

tion (default setting).

• BEFORE

Playback will repeat over an area corresponding

to the nudge time and ending at the current loca-

tion.

Nudge time

Current

location

Song

track

[DATA/JOG] dial moves

in smallest steps

Larger movement

according to the angle

of the [SHUTTLE] dial

Current location

PLAY MODE：BEFORE PLAY MODE：AFTER

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 419 420

Comments to this Manuals

No comments

Yamaha AW2816 Owner's Manual Page 102

Comments to this Manuals

Related products and manuals for Receiver Yamaha AW2816