Yamaha AW2816 Owner's Manual Page 169

  • Download
  • Add to my manuals
  • Print
  • Page
    / 420
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 168
Using the internal hard disk/external storage devices
164
Chapter
11
Operation section
Restoring backup data
Song data that was backed up on a storage device can
be restored (loaded) back into the AW2816’s internal
hard disk.
1
Press the [FILE] key [F2] key.
The FILE screen/Restore page will appear, where
you can perform Restore operations.
2
Move the cursor to the SOURCE area
located in the lower left of the display, and
use the [DATA/JOG] dial to select the drive
on which the backup data was saved.
Select “ATAPI” when restoring from the internal
CD-RW drive, or the corresponding SCSI ID
when restoring from an external drive.
3
If you are restoring from a CD-RW drive or
MO drive, insert the media into the drive.
If restoring from a CD-RW drive, hold down the
[SHIFT] key and press the [F2] key to open the
tray of the CD-RW drive, and insert the CD-R/
RW media. Hold down the [SHIFT] key and press
the [F1] key to close the tray of the CD-RW drive.
If the backup extended across multiple volumes of
media, you must be sure to insert the first volume of
media.
4
Press the [ENTER] key.
The list in the upper part of display will show the
backup data that has been saved in the selected
drive.
5
Move the cursor to the list in the upper
part of the display, and use the [DATA/JOG]
dial to select the song data that you want
to restore. Then press the [ENTER] key.
The RESTORE SONG button will change from
DISABLE to ENABLE, indicating that the song
data has been selected for restoration. The “O”
symbol in the left of the list will change to “” to
indicate song data that has been selected for res-
toration.
6
If you want to restore the data for multiple
songs, repeat step 5.
Tip!
If you want to restore all song data, move the cursor
to the ALL ENABLE button located in the center of
the display, and press the [ENTER] key.
If you want to exclude all song data from the selec-
tion, move the cursor to the ALL DISABLE button
and press the [ENTER] key.
7
When you have nished making settings,
move the cursor to the EXECUTE button
and press the [ENTER] key.
A popup window will ask you to confirm the
Restore operation.
Page view 168
1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 419 420

Comments to this Manuals

No comments