Yamaha AW2816 Owner's Manual download pdf (Page 91)

Using the internal effects

Chapter

Operation section

Using AUX send/return to apply an effect

This section describes the example of using effect 1

via AUX bus 5 in a send/return conﬁguration.

Check the patching

First we will check whether the AUX send/return

patching for effect 1 is set appropriately.

Press the [PATCH] key → [F1] key.

The PATCH screen Patch IN page will appear.

In the EFFECT PATCH area, make sure that

EFF1 is set to “AUX 5.”

In the EFFECT PATCH area of the Patch IN page,

you can select whether effect 1/2 will be used via

an AUX bus or inserted into a speciﬁc channel.

With the default settings of the AW2816, AUX 5

(AUX bus 5) is assigned to EFF 1 (effect 1), and

AUX 6 (AUX bus 6) is assigned to EFF 2 (effect 2),

as shown in the illustration above.

Tip!

If EFF1 is set to “INSERT,” move the cursor to the set-

ting and turn the [DATA/JOG] dial. In the popup win-

dow that appears, move the cursor to the OK button,

and press the [ENTER] key to switch EFF1 to the “AUX

5” setting.

In the MIXER CHANNEL INPUT ASSIGN

area, make sure that RTN 1 is set to “EFF1

L/R.”

In the MIXER CHANNEL INPUT ASSIGN area of

the Patch IN page, you can select the signal that

will be assigned to the input channels/return

channels of the mixer. With the default settings,

“EFF1 L/R” (L/R outputs of effect 1) is assigned to

RTN1 (return channel 1).

Tip!

If RTN1 is set differently, move the cursor to the set-

ting and turn the [DATA/JOG] dial to change it to

“EFF1 L/R.”

Recalling an effect program from

the library

The internal effects of the AW2816 allow you to use

41 different effect types, such as REVERB HALL, GATE

REVERB, and STEREO DELAY. With the factory set-

tings, 41 effect programs using these effect types are

preset in an area of internal memory called the “effect

library.” Here’s how to recall an effect program into

effect 1.

Press the [AUX 5] key → [F2] key.

The AUX5/EFF1 screen Library page will appear,

in which you can store or recall effect programs.

A list of the effect programs is shown in the lower

part of the display.

Tip!

Effect library numbers 001–041 contain read-only

effect programs using each effect type.

The AW2816’s effect library can be used by both

effect 1 and effect 2. However, effect programs that

use “HQ-Pitch” (library number 19) can be used only

by effect 2.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 419 420

Comments to this Manuals

No comments

Yamaha AW2816 Owner's Manual Page 91

Comments to this Manuals

Related products and manuals for Receiver Yamaha AW2816